After a lot of issues I finally got the car running. Very poorly I might add. I did a compression test and cylinder 1 had zero compression. Also I noticed a ton of white smoke from the exhaust. That usually means coolant is getting in the cylinder which means head gasket failure. I then drained the oil and it was milky also meaning head gasket failure. Even with a head gasket failure I should have some compression so I was stumped. I removed the cylinder head and found the issue. A bent intake valve. So I will be replacing the valves in cylinder 1 and putting on a new head gasket and I will check compression again. I feel it will be good to go.
I have been working steadily on the car and have run into a couple of problems. I had a broken radiator that has been replaced and now I am trying to track down an electrical issue. I hope to have the car running by this weekend.